Juniper Networks E-Series - Manual (Page 48)

CHAPTER 3
Installation Guidelines and Requirements 3-2
• Ensure that all IP environment requirements are met, such as
autonomous system (AS) number, port IP address and mask,
management Ethernet port IP address and mask, and broadcast
address.
Environmental Requirements
Refer to Chapter 11, System Specifications for complete environmental
specifications.
Choose a location for the router that is dry, relatively dust free, well
ventilated, and air conditioned. If you install equipment in a rack, be sure
that the floor is capable of supporting the combined weight of the rack
and the installed equipment. Place the router in a location with sufficient
access to power and network cables.
Like other network devices, the router generates a significant amount of
heat. It is important to provide a balanced environment so that the router
performs properly and safely. See
Chapter 11, System Specifications for
acceptable ranges of temperature and humidity.
Be sure to allow enough space around the router for adequate ventilation.
Inadequate ventilation can cause the system to overheat.
Caution: Do not block the air vents on E-series routers. Otherwise, the router may
overheat.
Regulatory Compliances
Refer to Chapter 11, System Specifications , for a complete list of
regulatory compliance requirements, including safety, EMC, and
telecommunications.