Smith Cast Iron Boilers GB300 - Manual (Page 32)

GB300 BOILER INSTALLATION AND OPERATION INSTRUCTIONS
Page 32
On 13-21 section models a splice kit is required
to assemble the front jacket panels. The splice kit is
shown in Figure 71. The splice panel sits on the splice
panel brackets shown in Figure 45 and Figure 83.
Figure 84 shows the upper front splice panel in place.
The panels sits on top of the flue collector and is
inserted in the bracket mount. The bottom front splice
panel mounts to the lower bracket and is fastened to
the top splice panel using two jacket screws provided
as shown in Figure 85.
Figure 83 Splice Panel Brackets
Figure 84 Upper Front Splice Panel
Figure 85 Bottom Front Splice Panel