Sealife DC800 - Manual (Page 20)

Getting Started
>>
18
Choosing the Language
Specify in which language menus and messages are to be displayed on the
LCD monitor.
1. Slide the mode switch to [
], [ ] or
[ ], and press the MENU button.
2. Select [Setup] menu with the  button.
3. Select [Language] with the  /  buttons
and press the SET button.
4. Select the displayed language with the
 /  buttons and press the SET
button.

The setting will be stored.
Capture
SET:Adj. MENU:Exit
Formatting the Memory Card or Internal Memory
This utility formats the internal memory (or memory card) and erases all stored
images and data.
1. Slide the mode switch to [
], and press
the MENU button.
2. Select [Setup] menu with  button.
3. Select [Format] with the  /  buttons,
then press the SET button.
4. Select [Execute] with the  /  buttons,
and press the SET button.
 To cancel formatting, select [Cancel]
and press the
SET button.
Play
SET:Adj. MENU:Exit
Format
SET:Enter
 You should format the memory card before its initial usage or after the
card has been used in another camera or SD card device.
NOTE