Sealife DC800 - Manual (Page 21)

Captur
e Mode
>>
19
CAPTURE MODE
Capturing Images
Your camera is equipped with a 2.7” full color TFT LCD monitor to help you
compose images, playback recorded images/video clips or adjust menu
settings.
1. Press the
ON/OFF button to turn the power on.
 The status LED lights green and the camera is initiated.
 When the power is turned on, the camera will start in the mode that
was last set.
 If the power is turned on in [ ] or [ ] mode, the lens will extend
forward and it is ready for shooting. In both modes, if the mode switch
is set to [
], the lens barrel will retract into the camera body after 30
seconds.
 If the power is turned on in [ ] mode, the lens will remain closed.
2. Slide the mode switch to [ ].
3. Compose your image in the LCD monitor.
 Pressing the button zooms in on the subject, and enlarges the subject
on the LCD monitor.
 Pressing the button provides a wider angle image.
4. Press the shutter button.
 Pressing the shutter button down
halfway automatically focuses and
adjusts the exposure, and pressing the
shutter button down fully captures the
images.
 The focus area frame turns green
when the camera is in focus and the
exposure is calculated.
 When the focus or exposure is not
suitable, the frame of the focus area turns red.
a
b