Sealife DC800 - Manual (Page 35)

Playback Mode
>>
33
2. Select [Single] or [All] with the  /  buttons, and press the SET button.
3. Select [Cancel Protect] with the  /  buttons, and press the SET
button.

The removal of image protection is executed and the camera returns
to the playback mode.
Protecting multiple images simultaneously
1. Select [Protect] with the  /  buttons from the playback menu, and press
the SET button.
2. Select [Select] with the  /  buttons, and press the SET button.
 The images are displayed in the thumbnail display.
3. Select the image you want to protect with the  /  /  /  buttons, and
press the DISP button.
 The protect icon [ ] is displayed with protected images. Selecting a
protected image and pressing the
DISP button again will cancel the
protection. This procedure is repeated to select multiple images.
4. Press the SET button.
 Protection and cancellation of the protectionare are executed and the
camera returns to playback mode.
 Formatting an SD/SDHC memory card overrides protection, and erases
all images regardless of their protected status.
NOTE