Sealife DC800 - Manual (Page 67)

How T
o Open And Close W
aterpr
oof Housing
>>
65
Installing the Flash Link optical cable adapter
The Flash Link adapter included with your camera connects the Flash Link
optical cable to the DC800 camera housing. This adapter is only needed when
using the SeaLife external flash accessory. Optical cables (item SL962)and
external flash accessories (SL961, SL960D) are optional accessories sold
separately. For more information about these accessories, please contact your
local SeaLife dealer or visit www.sealife-cameras.com.
Step 1: Push the optical cable into one of
the grooves so it’s locked firmly into
position. The end of the cable must
be directed at the camera’s flash
but should not stick out beyond
the adapter. The adapter has two
grooves, so you can add another
cable when using two flashes.
Step 2: Attach the Flash Link adapter around
the lens and push down until it locks
firmly into place. There are two small
locking mechanisms located on the
outer edge of the adapter that should
lock in to the camera housing. Make
sure the adapter is oriented so it
is aligned with the recessed flash
window.