Sealife DC800 - Manual (Page 26)

About Spy Mode
>>
24
About Spy Mode
This mode is used to capture continuous images at a preselected time interval.
This mode is useful for taking a sequence of images, like a sunrise or sunset,
and later selecting the best image. It is also useful for taking a series of pictures
without being discovered by the subject. For example, a bird’ s nest with an
egg hatching. A compact tripod accessory is helpful to keep the camera aimed
at the subject.
1. Slide the mode switch to [
].
2. Press the MENU button, and select the
[Function] menu with the  button.
3. Select [Capture mode] with the  / 
buttons, and press the SET button.
4. Select [Spy] with the  /  buttons, and
press the SET button.
5. Select the desired time interval with the
 /  buttons and press the SET button.
6. Press the MENU button to exit the menu.
7. Aim the camera at the desired subject or
scene. It is preferred to use a compact
tripod, so the camera is steady and remains
aimed at the subject.
8. Push the shutter button. The camera will
countdown from 10 seconds and take the
first picture.
9. The LCD display will now turn off to save
battery power. The camera will continue to
take images at the preselected time interval,
until:
a. You push the shutter button again.
b. The memory is full.
c. The battery is empty.
 When using the SPY shooting mode underwater , it is helpful to have a
waterproof tripod that can stabilized the camera. We recommend using
the Gorillapod SLR. For more information, please visit:
www.joby.com/products/gorillapod/slr/
NOTE