Sealife DC800 - Manual (Page 57)

Appendix
>>
55
6. The printing starts and the figure shown
on the right hand side appears.

[COMPLETE] will be displayed
temporarily, reminding you that the
printing procedure is finished.
 If an error is detected during the
connection (i.e. the printer hardware
problem) between camera and printer,
[PRINT ERROR] will be displayed.
 If an error is detected during the
communication (i.e. wrong setting
on the camera) between camera and
printer, [ERROR] will be displayed.
PRINTING
PictBridge
 The image printing may fail if the power to the camera is cut off.
 We recommend that you use the AC power adapter when connecting
the camera to the printer.
NOTE