Sealife DC800 - Manual (Page 56)

Appendix
>>
54
3. If you select [Select] in the previous step,
the figure shown on the right hand side
will appear.

Select the image that you want to
print with the  / buttons.
 Select the [Print Num] (up to 99) with
the  /  buttons.
 After selecting the desired image
and printing number, press the
SET
button to confirm.
Select
SET:Enter 105-0003
4. Select [Exit] with the  /  buttons, and
press the SET button.
SET:Enter
Select Next Menu
All Next Menu
Exit
Images
5. Select [Print] with the  /  buttons, and
press the SET button to start printing.
SET:Enter