Sealife DC800 - Manual (Page 55)

Appendix
>>
53
Printing images
When the camera is properly connected to a PictBridge compliant printer, the
PictBridge menu is displayed on the monitor.
1. Select the item you want to configure with
the  /  buttons, and press the SET
button.

[Images]: Select whether you want
to print specific image or all images.
You may also select printing number
for specific image.
 [Date Print]: According to the printer
type, select whether you want to print
the image with date imprint or not.
 [Paper Size]: Select the desired paper
size according to the printer type.
 [Layout]: Select the desired printing
layout according to the printer type.
 [Print]: After all settings are configured,
select this item to start printing.
PictBridge
SET:Enter
2. If you select [Images] in the previous step,
the figure shown on the right hand side
will appear. Select [Select] or [All] with the

/  buttons, and press the SET
button.

[Select]: Select to print one specific
image.
 [All]: Select to print all images.
 [Exit]: Exit from Images option.