Seiko Group BP-9000 - Manual (Page 10)

To make your first print, follow the procedure below . For more detailed instructions on setting your
printer, please refer to the page indicated.
Self Test
Self Test
?
?
?
?
?
?
❏ To set up the printer
1. Install the paper rack, the sound seal cover,
and the ribbon cassette — Pages 10 and 11.
2. Load the single cut sheet paper or fanfold
paper. Press the FF key to load the paper —
Pages 13 and 14.
❏ To make a test print
1. Set the paper size of the printer in the setup
options — Pages 26 and 27.
2. Press the LF key and hold while initializing
the printer by the RESET key. Hold the LF
key until the self test starts — Page 21.
❏ To connect your computer
1. With all equipment turned off, connect the
printer to your computer. Interface cable is
purchased separately — Page 12.
2. Use the extended setup options (emulation
t y p e a n d c o m m u n i c a t i o n e n h a n c e m e n t
section) to match the specification needs
between the printer and your computer —
Pages 33 to 56.
3. S e l e c t t h e p r i n t e r d r i v e r f r o m y o u r
application software — Page 57.
2
Quick startup
Quick startup