Seiko Group BP-9000 - Manual (Page 117)

❏ EPSON mode
ITEM SYMBOL Hexadecimal & Decimal FUNCTION
[1] BEL [07] H [7] D Activates the bell.
[2] BS [08] H [8] D Backspace one character.
[3] HT [09] H [9] D Moves to next horizontal tab.
[4] LF [0A] H [10] D Linefeeds after printing.
[5] VT [0B ]H [11] D Linefeeds to next vertical tab position after printing.
[6] FF [0C] H [12] D Form feeds after printing.
[7] CR [0D] H [13] D Carriage return after printing.
[8] SO [0E] H [14] D Sets double width character mode for 1 line.
ESC SO [1B,0E] H [27,14] D DC4, LF, FF, ESC N, and ESC ! cancel this mode.
[9] SI [0F] H [15] D Sets condensed character mode.
ESC SI [1B,0F] H [27,15] D 10 and 12 cpi becomes 17.1 and 20 cpi, respectively.
[10] DC1 [11] H [17] D Selects printer that has been deselected by DC3.
[11] DC2 [12] H [18] D Cancels condensed character mode.
[12] DC3 [13] H [19] D Deselects printer.
[13] DC4 [14] H [20] D Cancels double width character mode set by SO.
[14] CAN [18] H [24] D Clears data in buffer and move print head to home
position.
[15] DEL [7F] H [127] D Deletes one character.
[16] ESC EM n [1B,19,n] H [27,25,n] D Controls cut sheet feeder.
n=1: selects bin 1
n=2: selects bin 2
n=R: ejects single sheet paper loaded in the printer
This command is effective at the following conditions.
The paper select lever is set to the single sheet setting.
#49 CSF OPTION is set to SINGLE or DOUBLE.
[17] ESC SP n [1B,20,n] H [27,32,n] D Sets intercharacter space in dot units.
0
≤
n
≤
127 The dot width in pica mode is 1/120 inch.
[18] ESC ! n [1B,21,n] H [27,33,n] D Sets multiple print modes.
n is specified by the following bit combination.
(0
≤
n
≤
255)
Note: Proportional cannot be specified with elite or condensed, and has higher priority.
[19] ESC # [1B,23] H [27,35] D Cancels MSB control set by ESC = or ESC >.
Print mode Dot width
Draft 1/120 inch
LQ/Proportional 1/180 inch
Print modes Dec. Hex. Correspond command
Pica 0 00 ESC P
Elite 1 01 ESC M
Proportional 2 02 ESC p
Condensed 4 04 SI, DC1
Emphasized 8 08 ESC E, ESC F
Double strike 16 10 ESC G, ESC H
Double width 32 20 ESC W
Italic 64 40 ESC 4, ESC 5
Underline 128 80 ESC -
109
B. Control code summary (Epson)