Seiko Group BP-9000 - Manual (Page 68)

60
If an error occurs during printing, you will get several warnings. A buzzer sounds, P.OUT
lamp blinks, and an error message appears in the display window of the front control panel.
❏ Error Messages
Error Message Cause and Solution
CARRIAGE ERROR
RAM ERROR
(NO LCD DISPLAY
The P.OUT lamp blinks and the
buzzer sounds after power on. )
FAN ERROR
HEAD PROTECTION
(ON LINE lamp blinks.)
PAPER ERROR
(Buzzer sounds 3 times.)
PAPER OUT
COVER OPEN
POWER DOWN
The printer cannot detect the print head position.
◆
Turn off the printer immediately. After a brief wait, turn on
the printer again.
Internal RAM does not function properly.
◆
Turn the printer off and back on again. If the error persists,
consult your dealer.
Abnormal fan operation is detected.
Long continuous printing may overheat the print head.
◆
The printer stops temporarily and restarts automatically
when the print head temperature lowers to a safe level.
Paper jam or improper paper operation has occurred.
◆
If paper parking is not completed, press the PARK key.
Otherwise reload the paper.
Paper is not loaded in the printer.
◆
Load paper (pages 13 and 14).
One of the printer covers is open.
◆
Close the cover to restart the operation.
Abnormal current is detected.
◆
The printer is automatically turn off. Stop using the printer,
and contact the dealer.
7. Troubleshooting
7. Troubleshooting