Seiko Group BP-9000 - Manual (Page 73)

Guide
Pivot
L-angle Hinge
Printer Cover
◆ Open the front cover to an upright
position, then lift and remove the
cover.
Rear Cover
◆ O p e n t h e r e a r c o v e r f r o m t h e
bottom edge of the cover and pull it
away from the printer to remove.
Paper Rack
◆ S l i d e b o t h p a p e r g u i d e s t o t h e
extreme left and right edges of the
paper rack. Raise the rear end to
s t a n d v e r t i c a l l y a n d l i f t s t r a i g h t
upward to remove.
Sound Seal Cover
◆ Push out on the outer edge of the
sound seal cover where it connects
t o t h e L - a n g l e f r o m t h e p r i n t e r
while pushing the stud of the L-
angle out of the hole. Then remove
the whole cover.
65
8. Maintenance (Printer cover removal)