Seiko Group BP-9000 User Manual
Page 81
(8) End of the bar code data sequence: ESC SO
Format:
ASCII
ESC
SO
Hex
1B
0E
Decimal
27
14
Function:
Indicates the end of a bar code data sequence.
This command is valid only when #27 BARCODE/LABEL MODE is set
to MODE 2 in the EXTENDED SETUP MODE.
(9) Bar code data sequence: DC4 DC4 B
Format:
ASCII
DC4
DC4
B
n
d1
d2 ... dk
Hex
14
14
42
n
Decimal
20
20
66
n
Function: Specifies the number (“n”) of data to be regarded as bar code data.
00
≤
n
≤
68
00
≤
dk
≤
255
00
≤
k
≤
68
If the Element is selected; 0
≤
n, dk, k
≤
255
This comand is valid when #27 BARCODE/LABEL MODE is set to MODE1 or
MODE2 in the EXTENDED SETUP MODE.
(10) Printing density: DC4 DC4 D
Format:
ASCII
DC4
DC4
D
n
Hex
14
14
44
n
Decimal
20
20
68
n
Function:
Specifies the density of printing bar code symbols (in the horizontal
direction).
Specifies the unit of element width.
n = 0:
Bar code symbols are printed at 120 dpi. (Default value)
1:
Bar code symbols are printed at 180 dpi.
If a bar code is rotated by 90 or 270 degrees using the DC4 DC4 R (bar code
rotational angle) command, a bar code is printed at 120 dpi horizontally and 180
dpi vertically.
(11) Guard bar expansion: DC4 DC4 G
Format:
ASCII
DC4
DC4
G
n
Hex
14
14
47
n
Decimal
20
20
71
n
Function: Specifies whether or not to expand EAN or UPC guard bars.
n = 0: Guard bars are not expanded.
1: Guard bars are expanded. (Default value)
9. Bar code and enlarged character
73