Base station, Front, Rear – Sony LF-X1 User Manual
Page 14
F:\Joutou\#4090332_Sony_LF-X\4103221121up\4103221121\4103221121LF-
X1\00GB04C00-WW.fm
masterpage: Left
LocationFreeTV
4-103-221-12(1)
14
The base station specifications are common to the LF-X1 and LF-X5.
Base Station
1 WIRELESS indicator
Indicates the wireless function status.
Blue lit:
Connected with the monitor
on the 5 GHz channel.
Green lit:
Connected with the monitor
on the 2.4 GHz
channel.
Blue or green blinking (3 sec. intervals): Attempting to
connect with the monitor. The wireless function is
active but out of range.
2 INTERNET indicator
Indicates the connection status to an external network, such
as the Internet.
Green blinking: Attempting to connect.
Green lit: Connected to the network. The indicator blinks
when packets are transmitted.
Off: Not connected.
3 NetAV indicator
Indicates the NetAV connection status.
Green quick blinking: NetAV authentication has failed.
Green slow blinking: Attempting to connect with NetAV.
Green lit: Connected with NetAV.
Off: Not connected.
Red lit: The base station is being initialized.
Also turns red
when Dynamic DNS client settings fail.
4 POWER indicator (
Green lit: The power is on.
Red flashing: A malfunction has occurred.
5 POWER switch (
Turns the base station power on and off.
6 LAN port (
Connect a LAN cable.
7 USB port
8 VHF/UHF jack (
Connect an antenna cable.
9 VIDEO OUTPUT (AUDIO/VIDEO) terminal
Outputs audio/video signal input to the video input 2
terminal.
Connect audio and video cables.
0 DC IN jack (
Connect the AC power adapter for the base station (supplied).
qa IR BLASTER port (
Connect the IR Blaster (supplied).
qs IN 1 (S-VIDEO/AUDIO/VIDEO) terminal (
Connect audio cables and either a video or S-video cable.
qd IN 2 (AUDIO/VIDEO) terminal (
Connect audio and video cables.
qf CLR CFG button (
Returns all settings on the base station, including line and
wireless connection settings, to the factory defaults.
Front
1
2
3
4
5
Rear
0
9
8
7
6
qf
qd
qs
qa