Sony LF-X1 - Manual (Page 69)

F:\Joutou\#4090332_Sony_LF-X\4103221121up\4103221121\4103221121LF-
X1\00GB06C02-WW.fm masterpage: Right
LocationFreeTV
4-103-221-12(1)
69
Using the Sub-Screen (LF-X1 only)
B
a
si
cs
Ope
ra
tio
ns
While viewing web pages or mail, you can watch
TV or video on the sub-screen.
Select [PIP] at the bottom right of the screen.
The most recent TV or video channel is displayed
on the sub-screen at the bottom right of the
screen.
If you touch the sub-screen, buttons for operating
the sub-screen appear.
• When using the built-in tuner, you can change
channels in the sub-screen using [–] and [+].
If you connect the IR Blaster to a set-top box
connected to an antenna, you can change
channels on the set-top box, as well.
• To watch the image in full screen, select [Full].
• If you select [Sound], the speakers output
sound for the sub-screen but pictures on the
sub-screen disappear. To restore the picture
display, select [PIP].
• To quit the sub-screen display, select .
z Tip
You can move the sub-screen to a different position.
Touch the sub-screen and then drag it to the desired
position. You cannot move the sub-screen, however,
when the following windows are displayed:
• [Index] window
• Capture list
• Dialog message
• On-screen Keyboard
• Web browser page list
Note
The sub-screen goes dark if you select a channel on
external video equipment that has not been connected
or has been turned off.
Using the Sub-
Screen (LF-X1 only)
The most recent channel is
displayed on the sub-screen.