Sony LF-X1 - Manual (Page 110)

F:\Joutou\#4090332_Sony_LF-X\4103221121up\4103221121\4103221121LF-
X1\00GB09C05-WW.fm masterpage: Left
LocationFreeTV
4-103-221-12(1)
110
[Stamp] panel
There are five types of stamps you can use to
make single marks or running patterns.
The [Stamp] panel appears when you select the
[Stamp] tab.
You can play back movies saved in the album.
The LocationFreeTV supports movies in the
MPEG 1 format.
Notes
• The LocationFreeTV can only play movies saved in
the MPEG 1 format with the “mpg” extension.
• The unit cannot play movies exceeding 640 × 480
pixels. Movies shot with a Sony Cyber-shot or
Handy Cam meet this requirement. The
LocationFreeTV may not be able to play back
movies created with a computer.
• Animated GIF images are displayed the same way as
still images.
• Movies are played at their original size on the
LocationFreeTV. The movie size is reduced during
play, however, if it exceeds 640 × 480 (for the LF-
X1) or 480 × 360 (for the LF-X5).
1
Open the [Picture List] window, and select
the movie you want to play. Do not select the
check box by the movie.
The
icon appears to the right of movie
titles.
The [Play Movie] window appears and the
movie automatically starts playing.
z Tips
• A slider bar shows the current playback position.
You can change the playback position with this bar
while a movie is playing or paused.
• For large-sized movies, playback speed may be
slower than normal.
• The playback window goes dark when a movie ends
with the [Play], [FF], or [Rew] operations.
To use stamps
1 Select the type of stamp you want to use.
2 For [Width], select the size of the stamp.
3 Select a color from the color palette to make it appear in
the [Color] box.
4 Touch the screen with the stylus, or move the stylus on
the screen.
[Stamp] tab
Watching Movies