Sierra Wireless EV-DO - Manual (Page 127)

Configuration Commands
Rev 3.0B Feb.08 122
*NETPW=pw
The password that is used to login to the cellular network,
when required.
• pw=password (30 characters maximum)
*NETPHONE?
The modem’s phone number, if applicable or obtainable.
*NETROAMPREF=n
Allow configuration of the roaming preference.
• n=0 : Restrict to home network only.
• n=1‐3 : Allow roaming to affiliated networks.
• n=3
When the value is set to 3, it is set to:
Automatic‐B, (Non‐preferred system): Attempt to acquire
systems listed in PRL; if no match, search for available B‐band
cellular carrier
• n=1
When the value is set to 1, it is set to:
Automatic, (Preferred system): Acquire systems listed in PRL
only.
Note: As always there will be additional charges for roaming to a
different network.
*NETUID=uid
The login that is used to login to the cellular network, when
required.
• uid=user id (up to 64 bytes)
*PRLDIAL=n
Update the PRL by contacting your cellular carrier.
• n=0 : Disabled
• n=1 : Update PRL.
*STATICIP=d.d.d.d
Set the static IP required to be received from the network. If the
modem does not get this IP address from the network, it will
reset the internal hardware and try again. The default is 0.0.0.0,
which allows any IP address from the network.
• d.d.d.d=IP address