Sierra Wireless EV-DO - Manual (Page 161)

Configuration Commands
Rev 3.0B Feb.08 156
*PROVISION=MSL,MDN/MIN[,SID][,NID]
Tip: It is recommended to use the Setup Wizard for your carrier to
provision the modem.
Provision the modem with the lock code and phone number.
Cannot be configured in AceManager.
• MSL=master lockcode
• MDN/MIN=phone number
• SID=system ID
• NID=network ID
*PROVISION2=MSL,MDN,MIN[,SID][,NID]
Tip: It is recommended to use the Setup Wizard for your carrier to
provision the modem.
A second set of modem provision parameters, when the MDN
and MIN (MSID) are different or “split”. Cannot be configured
in AceManager.
• MSL=master lockcode
• MDN/MIN=phone number
• SID=system ID
• NID=network ID
~NAMVAL=nam[,min,msid,sid,nid]
Tip: It is recommended to use the Setup Wizard for your carrier to
provision the modem.
Write account activation data. Following writing the values,
the modem must be reset.
• nam=0
• min=phone number
• msid=second number
• sid=0 or the system ID
• nid=63355 or the network ID
Note: If ~NAMLCK has not been successfully executed, the modem
returns ERROR.
• nam=0
• min=phone number