Sierra Wireless EV-DO - Manual (Page 53)

Configuring your PinPoint-E
Rev 3.0B Feb.08 48
2. Connect To
Using Serial:
a. Select COM1, or the comport to which the modem is
connected, for the “Connect Using”.
Figure 5-14: Connect To
Using Ethernet:
a. Select TCP/IP (Winsock) for “Connect Using”.
b. Type in 192.169.13.31 for Host Address.
c. Change the “Port Number” to 2332.
d. Select OK.
3. Port Settings (serial only)
a. Change or verify the settings: