Sierra Wireless EV-DO - Manual (Page 156)

PinPoint-E EV-DO
151 20070914
*PPINPUTEVT=n
Enable sending input changes as events (different report
types).
• n=0 : Disable
• n=1 : Enable
*PPIP=d.d.d.d
IP address where GPS reports are sent (ATS Server IP). Also
see *PPPORT.
• d.d.d.d=IP address
Example:
AT*PPIP=192.100.100.100
*PPLATS=n
Local ATS ‐ Causes GPS reports to also be sent out the serial or
Ethernet link every n seconds, when there is a PPP connection
to the serial host or a connection to the Ethernet port is estab‐
lished.
• n=0 : Disable
• n=1‐255 seconds
Tip: Sends to the PPP peer IP S110 with the Destination Port number
S53.
*PPLATSEXTRA=n
Have local ATS reporting (LATS) send up to 7 extra copies of a
GPS report to the subsequent ports.
• n=0 : Just the original report is sent (default).
• n=1‐7 : Send GPS report copies to that number of ports.
Example: If AT*PPLATSEXTRA=7 and the port in S53 is 1000,
then GPS reports will be sent to ports 1000‐1008.
*PPLATSR=n
Indicates the type of GPS report to send to the local client
(PPP/SLIP peer). See *PPGPSR.
• n=0x11 : Standard GPS Report
• n=0x12 : Standard GPS Report + UTC Date
• n=0x13 : Standard GPS Report + UTC Date + RF data
• n=0xE0 : GGA and VTG NMEA reports
• n=0xE1 : GGA, VTG and RMC NMEA reports
• n=0xF0 : TAIP reports
• n=0xF1 : Compact TAIP data