Sony Remote Control Panel RCP-D50/D51 - Manual (Page 15)

15
The RCP-D50/D51 provides menu operations for
various functions such as adjustments of system
equipment.
Basic Operating Procedure
1
To display a menu, press and light one of the
MENU buttons.
The menu operation mode is initiated and the menu
for the pressed button appears on the display.
PAINT 1/2/3: Paint menu
SCENE: Scene file operation menu
OTHERS: OTHERS menu
FUNCTION: Function menu
Note
The menu items to be displayed depends on the
connected camera.
2
Select the item to be adjusted.
Press the button that shows the name of the item on
the menu to obtain the corresponding adjustment
display or operation area.
When the selected menu is composed of
multiple pages
With the menu that is composed of multiple pages
such as Paint menu, press v or V to flip the pages.
See “Initial display (Paint menu)” on the next page.
When a submenu is shown
Press the desired submenu item to change the
display.
See “Submenu” on page 17.
3
Set or adjust the item (parameters).
• Turn the control knobs (or press the button) to
adjust (or set) the corresponding item
(parameters) to the desired values.
See “Adjustment display” on page 17.
• When a message is displayed, follow the
instruction and press [OK] .
When the adjustment is finished
• To adjust another item of the same menu, press the
names of that item.
• To adjust items of another menu, press the
corresponding MENU button.
• To release the menu operation mode, press the lit
MENU button.
• You may select Function menu without exiting the
currently selected menu. When you exit Function
menu by either of the following methods, the
previous menu is restored.
– Press the lit FUNCTION button so that it goes dark.
– Press the lit MENU button for the previous menu.
To monitor the camera picture
Press the MONITOR button.
The picture from the connected camera is displayed on
the LCD.
With a DXC-D50-series camera connected, eath time
you press the MONITOR button, the camera picture,
the camera picture with characters superimposed, and
the menu display of this unit are displayed in
sequence. (When a CCU is used, the camera picture
with characters is not displayed.)
Menu Configuration and Basic Menu Operations
MONITOR
BRIGHT CONTRAST
PAINT 1 PAINT 2 PAINT 3
MENU
SCENE OTHERS FUNCTION MONITOR
1
2
3