Sony Remote Control Panel RCP-D50/D51 - Manual (Page 17)

17
Adjustment display (Paint menu)
When you select an item on the initial display of the
Paint menu, the lower half of the panel becomes the
adjustment display for the selected item.
Submenu
If the selected item has many parameters, a submenu is
displayed.
The name of the item selected on
the initial display is displayed.
If you press this area after pressing
[Clear], all the adjustment values for
the selected item are initialized to
standard.
The adjustment parameters
for the selected item and their
adjustment values are
displayed.
You may adjust these items
using the corresponding
control knobs.
If you press a value area after
pressing [Clear], that
adjustment value is initialized
to standard.
Clear
WF/PIX
Select
Detail 1
Detail Skin
Detail
Black
Gamma
2 / 5
0
1 2
Frequency Level
0
H/V Ratio
0
WF/PIX
Select
Detail 2
0
1 2
Crispening
0
Level Dep
When there are any ON/OFF
functions related to the adjustment,
the names of the functions are
displayed on this line.
Submenu
Press to switch the parameters.
Example: when you select “White” from the PAINT 1 initial display with the DXC-D50 series
connected
Example: when you select “Skin Detail” from the PAINT 2 initial display (Advance mode)
with the DXC-D50 series connected
Clear
Monitor
Select
White
White Black Flare Gamma
/Knee
Preset Memory
A
Memory
B
1 / 5
0
B R
ATW
0
When you press this, the upper
half of the panel becomes the
monitor output setting display
(
see page 19).