Function menu (with the ccu-tx50) – Sony Remote Control Panel RCP-D50/D51 User Manual
Page 41
41
Function menu (with the CCU-TX50)
Menu
Control item
Function
Operation
Jump menu 1
To jump to the adjustment screen designated for Menu 1 in Menu Set
a)
(Default: White of Paint 1)
Jump menu 2
To jump to the adjustment screen designated for Menu 2 in Menu Set
a)
(Default:Black of Paint 1)
Jump menu 3
To jump to the adjustment screen designated for Menu 3 in Menu Set
a)
(Default: Flare of Paint 1)
Jump menu 4
To jump to the adjustment screen designated for Menu 4 in Menu Set
a)
(Default: Gamma/Knee
of Paint 1)
Jump menu 5
To jump to the adjustment screen designated for Menu 5 in Menu Set
a)
(Default: Detail of Paint 2)
Jump menu 6
To jump to the adjustment screen designated for Menu 6 in Menu Set
a)
(Default: Skin Detail of
Paint 2)
Jump menu 7
To jump to the adjustment screen designated for Menu 7 in Menu Set
a)
(Default: Matrix of Paint
3)
Shutter
To turn the shutter function ON/OFF
• Shutter
To select the shutter speed
CLS
To turn the CLS (clear scan) function ON/OFF
• CLS
To select the CLS frequency
TLCS
To turn the TLCS (total level control) function ON/OFF
• Master Gain
To select the master gain value among –3/0/3/6/9/12/18/24/30/36 dB
SW
5600K
To turn the color temperature 5600K ON/OFF
Skin Detail
To turn the skin detail function ON/OFF
Detail Gate
To turn ON/OFF the display for the skin detail gate area (target color range for the skin detail
correction or the skin matrix adjustment)
ATW
To turn the ATW (auto tracing white balance) function (which automatically adjusts the white
balance when lighting conditions change) ON/OFF
TLCS
To turn the TLCS (total level control) function ON/OFF
Auto Knee
To turn the Auto Knee function ON/OFF
Skin Matrix
To turn the skin matrix function ON/OFF
Flare Off
To turn the flare correction function ON/OFF (OFF while the button is lit)
Lens/Pan
b)
Option 1
To turn the option control function 1 ON/OFF
Option 2
To turn the option control function 2 ON/OFF
• Focus
c)
To adjust the focus
• Zoom
c)
To adjust the zoom
• Pan
d)
To adjust panning of the tripod head
• Tilt
d)
To adjust tilting of the tripod head
a) The submenu “Menu Set” can be selected from Security of RCP Config on the OTHERS menu.
b) The item “Lens/Pan” is displayed when Pan/Tilt Enable is set to ON with Security of RCP Config on the OTHERS menu.
c) To control the lens from this unit, the optional focus zoom servo unit and the interface unit for the camera adapter and lens are required.
In addition, special settings must be made on the connected CA-TX50. For details, consult your Sony dealer.
d) To control the tripod head from this unit, an electric tripod head and the interface unit for the camera adapter and tripod head are required.
In addition, special settings must be made on the connected CA-TX50. For details, consult your Sony dealer.