Sony Remote Control Panel RCP-D50/D51 - Manual (Page 46)

46
Initial Settings
4
To set the date:
1) Press and light [Date] .
Year
2001
Month
8
Day
Date Time
Exit
Set Cancel
8
2001/11/17
(Sat)
22 : 12 : 31
Date Time Setting
2) Set the Year, Month and Day with the left three
control knobs.
3) Press [Set] .
The set date becomes valid.
To restore the previous setting, press
[Cancel]
instead of [Set] .
5
To set the time:
1) Press and light [Time] .
Hour
17
Minute
32
Second
Date Time
Exit
Set Cancel
25
2001/11/17
(Sat)
22 : 12 : 31
Date Time Setting
2) Set the Hour, Minute and Second with the left
three control knobs.
3) Press [Set] in synchronization with a time
signal.
The set time becomes valid.
To resume the previous setting, press
[Cancel]
instead of [Set] .
When the clock setting is completed
Press
[Exit] to leave the menu.
Adjusting the Buzzer Sound
A buzzer sounds on the RCP-D50/D51 when it
receives call signal or a panel control is operated.
When required, you may turn on/off the buzzer or
adjust the sound volume.
To adjust the buzzer, proceed as follows:
1
Press [RCP Adjusting] on the RCP Config menu.
The RCP adjustment menu appears.
Clear
Buzzer
Volume
LED
Bright
Exit
2
Press and light [Buzzer Volume] .
The lower half of the display becomes the Buzzer
Volume adjustment display.
Call
50
Touch
50
Switch Master
Call
Buzzer
Touch
Click
Buzzer
Volume
Clear
Buzzer
Volume
LED
Bright
Exit
SW
Click
All
Off
50 50
3
Adjust the levels with the corresponding control
knobs (50 is the standard value with all items).
Call: Sound volume of the buzzer when a call
signal is received
Touch: Sound volume of the buzzer when a
button displayed on the menu display is operated
Switch: Sound volume of the buzzer when a
button on the panel is operated
The master volume can be adjusted with the
rightmost control knob (Master).