Sony Remote Control Panel RCP-D50/D51 - Manual (Page 55)

55
Operating Setup Files (for DXC-
D30/D35 Series only)
Among the setting items listed in the table on pages 51
and 52, the settings for those items that have “yes” in
the Setup-file column are stored as a setup file in the
memory of the camera. In addition to five files
(PRESET 1 to PRESET 5) that have already been
registered in the camera, three more files (USER 1 to
USER 3) can be registered and retrieved as required.
To register or retrieve setup files, use the Setup File
operation display.
Registering a setup file
1
Press the OTHERS button in the menu operation
block to display the OTHERS menu on the LCD,
then press [File] to call the File menu.
2
Press [Setup File].
The Setup File operation display appears.
Exit
Recall
Store
Setup Files
PRESET 4 : FILMLIKE
PRESET 5 : SVHS/VHS
DXC_D
USER 1 : USER 1
USER 2 : USER 2
PRESET 1 : STD
PRESET 2 : HISAT
PRESET 3 : FL
USER 3 : USER 3
Sel
Char Cur
3
Turn the knob at the leftmost position (Sel) to
select a file to which you wish to register data
among USER 1 to USER 3 (user’s registration files
1-3) from the list.
4
Enter a filename (up to eight characters) in the
filename input box.
Moving the cursor: Turn the rightmost knob
(Cur) until the cursor comes to the position
where you wish to enter a character.
Selecting a character: Turn the second knob
(Char) from the right until the character which
you wish to enter appears.
5
Press [Store].
The current settings of the camera are stored as a
setup file with the name entered in Step 4, and that
filename is displayed on the list.
Retrieving a setup file
1
Call the Setup File operation display, then turn the
knob at the leftmost position (Sel) to select the file
you wish to retrieve from among PRESET 1 to
PRESET 5 (preset files 1–5) and USER 1 to USER
3 (user’s registration files 1–3) from the list.
2
Press [Recall].
The selected file is retrieved, and the settings of the
camera are replaced with the data of the retrieved
file.