Sharp UX-460 - Manual (Page 33)

Selecting the Reception Mode
Your fax has three modes for receiving incoming calls and faxes:
TEL mode:
Select this mode when you want to receive both phone calls and faxes
on the line connected to the fax machine. All calls, including faxes,
must be answered by picking up the fax machine’s handset or an
extension phone connected to the same line.
FAX mode:
Select this mode when you only want to receive faxes on your line.
The fax machine will automatically answer all calls on four rings and
receive incoming faxes.
TAD mode:
Select this mode when you are out and want the built-in answering
machine to answer all calls. Voice messages will be recorded, and fax
messages will be received automatically. ("TAD" is an acronym for
"Telephone Answering Device".)
Setting the reception mode
Press the RECEPTION MODE key until the arrow in the display
points to the desired mode.
RECEPTION
MODE
FAX TEL
TAD
FAX TEL
TAD
FAX TEL
TAD
FEB 1 10:30
FEB 1 10:30
FEB 1 10:30
2 1 3
9
4 5 6
7 8
0
RECEPTION MODE key
Note: TAD mode cannot be selected unless a general outgoing
message has been recorded as explained in Chapter 2.
For more information on receiving faxes in TEL and FAX modes, see
Chapter 4, Receiving Documents. For more information on using TAD
mode, see Chapter 2, Using the Answering Machine.
1.
I
n
s
ta
lla
ti
on
Selecting the Reception Mode
31