Sharp UX-460 - Manual (Page 41)

Erasing received messages
It is important to erase received messages after you listen to them to
ensure that the memory does not become full.
••
Erasing all messages: To erase all
messages, press and hold down the
DELETE key for at least 2 seconds.
••
Erasing a single message: To erase
only a single message, press the
DELETE key while the message is
being played.
Using the REC/MEMO key
You can use the REC/MEMO key to record telephone conversations
and messages for other users of the UX-460. These will be played
back together with any incoming messages when the PLAY/SKIP key
is pressed.
••
Recording messages: To record a
message, press the REC/MEMO
key for at least 1 second, and then
pick up the handset, press the
START/MEMORY key, and speak
into the handset. When you have
finished speaking, replace the
handset or press the STOP key.
••
Recording phone conversations:
To record a phone conversation,
hold down the REC/MEMO key
during the conversation you want to
record. When you are finished,
release the key.
DELETE
REC/MEMO
2.
A
n
sw
e
ri
n
g
M
a
c
h
ine
Operating the Answering Machine
39