Sharp UX-460 - Manual (Page 37)

3
Press the START/MEMORY key.
4
Press 1 to select GENERAL. (If you
are recording a message for the
Transfer function explained later in
this chapter, press 2 for TRANSFER.)
START/MEMORY
GENERAL TRANSFER
1 2 or
5
Pick up the handset, press the
START/MEMORY key, and speak
into the handset.
••
The outgoing message can be up to
60 seconds long. The outgoing
message for the Transfer function
can be up to 15 seconds long.
••
While recording, the display will
show the time remaining to record.
6
When finished, press the STOP key
and then replace the handset.
STOP
START/MEMORY
7
Press the STOP key to return to the
date and time display.
STOP
Recording an Outgoing Message
35