Sharp UX-460 - Manual (Page 70)

Storing fax and telephone numbers for Automatic Dialing
1
Press these keys:
The display will show:
FUNCTION
3
FAX/TEL # MODE
2
Press 1 to select SET.
1
The display will show: FAX/TEL # SET
ENTER SPEED #
3
Enter a two-digit Speed Dial number by pressing the number keys
(01 to 05 for Rapid Key Dialing, 06 to 45 for Speed Dialing).
(Example)
4
Enter the fax or voice number by pressing the number keys (max. of
32 digits including pauses). (Note: A space cannot be entered.)
••
Press the SPEED DIAL key to clear a mistake.
••
If a pause is required between any of the digits to access a special
service or an outside line, press the REDIAL key (two seconds
per pause). The pause will appear as a hyphen. Several pauses can
be entered in a row.
(Example)
5
Press the START/MEMORY key.
START/MEMORY
5 5 5 1 4 3 2
0 1
Sending a Fax by Automatic Dialing
68