Sharp UX-460 - Manual (Page 51)

(Example)
Overriding the answering machine
Your callers should follow the steps below to override the answering
machine.
1
Your caller calls the UX-460 from a
tone dial telephone. When the
outgoing message begins, they should
press the "#" key on their telephone.
••
The caller will hear a short beep,
and the outgoing message will stop.
2
The caller should enter the override
code and "#" by pressing the
appropriate keys on their telephone.
••
If an incorrect code is entered, the
caller will hear four beeps. He or
she must re-enter the correct code
within 10 seconds or the line will be
disconnected.
3
The UX-460 will make a special
ringing sound. Pick up the handset to
answer the call. (Note that an
extension telephone connected to the
same line will not ring.)
••
If you do not answer within 30
seconds, the outgoing message will
play again and the caller can then
leave a message.
4 5 5
2.
A
n
sw
e
ri
n
g
M
a
c
h
ine
Override Ringing
49