Secure Computing SSL Scanner - Manual (Page 10)

Introduction
default
is selected in the line below
Policy
, which means that the settings
you are going to configure now will be valid under your default filtering
policy. So, leave this selection as it is.
Otherwise, you could select a different filtering policy, using the drop-down
list provided here.
c. Enable
Advertising Filters
. To do this, mark the checkbox next to the
inscription.
You need to do this because all features that are placed under this main
feature (like the Animation Filter) will only work if it is enabled.
d. From the tabs provided for configuring the
Advertising Filters
op-
tions, select the
Settings
tab:
The
Animation Filter
section is located on this tab:
2.
Configure settings
a. Enable the feature. To do this, mark the checkbox next to the section
heading.
b. Check the radio button labeled
Remove all animated images.
Note:
To get help information on these settings, click on the question
mark in the top right corner of the section.
The section should now look like this:
1–6