Secure Computing SSL Scanner - Manual (Page 170)

SSL Scanner
Tunneling by Category
The
Tunneling by Category
section looks like this:
Using this section, you can configure tunneling for particular URL filtering cat-
egories. You can configure up to three categories for tunneling. These may
pre-defined or user-defined categories.
If you want to use additional categories, you need to enter them in the
<pol-
icy>.ini
configuration file, which is located in the
conf
folder of the Webwasher
program files.
This tunneling option is not enabled by default. If you want to enable it, mark
the checkbox next to the section heading.
After specifying the appropriate information, click on
Apply Changes
to make
your settings effective.
Use the items in the following areas to configure tunneling by category:
•
Define for which categories sessions should be tunneled
Select up to three categories from the drop-down lists provided here. Cat-
egories may be selected from pre-defined or user-defined categories.
To delete a category, click on the
Please select / Delete category
list
item in the corresponding drop-down list.
•
Define tunneling behavior
To determine what tunneling should mean for the selected categories, en-
able one of these options:
—
Verify certificate only
The certificate belonging to the requested URL is checked by a ver-
ification procedure, but no other activities are performed by the SSL
Scanner.
4–10