Secure Computing SSL Scanner - Manual (Page 185)

SSL Scanner
For the meaning of these actions, see the description of the
by cer-
tificate
method above.
A message will then be displayed, stating if the exception has been added
successfully and providing information on the result of the verification process.
If the by certificate method has been configured, you are informed whether
the certificate in question was issued by a trusted or not-trusted certification
authority (CA) from the corresponding list.
If the CA could not be found on this list, the certificate is implicitly forbidden.
If the inspection of a certificate results in an error or open issue, the depth of
the certificate is also stated in the corresponding error message. By depth is
meant the position the certificate takes within the certificate chain.
So, e. g.
depth = 0
means the certificate has been issued immediately for
the software in question, as is the case with self-signed certificates,
depth =
1
is for a certificate issued to certify a
depth 0
certificate and so on.
The newly added exception will be shown in a list displayed below.
To display only a particular number of list entries at a time, type this number
in the input field labeled
Number of entries per page
and enter it using the
Enter
key of your keyboard.
If the number of entries is higher than this number, the remaining entries are
shown on successive pages. A page indicator is then displayed, where you
can select a particular page by clicking on the appropriate arrow symbols.
You can also edit this list, by specifying the appropriate settings for a given en-
try. After doing this, click on
Apply Changes
to make these settings effective.
Use the following items to perform other activities relating to the list:
•
Filter
Type a filter expression in this input field and enter it using the
Enter
key
of your keyboard. The list will then display only entries matching the filter.
•
Delete Selected
Select the entry you wish to delete by marking the
Select
checkbox next
to it and click on this button. You can delete more than one entry in one go.
To delete all entries, mark the
Select all
checkbox and click on this button.
4–25