Secure Computing SSL Scanner - Manual (Page 113)

Common
Advertising Filter Settings
The
Advertising Filter Settings
section looks like this:
Using this section, you can configure settings that will apply to all the filters on
this tab.
After specifying the appropriate settings, click on
Apply Changes
to make
them effective.
Use the following checkboxes and radio buttons to configure these settings:
•
Replace filtered objects with
Mark this checkbox if you want to have filtered objects replaced with some-
thing.
Then check the radio buttons below to specify with what they should be
replaced:
—
a transparent image
Enable this option to replace an animated image with a transparent
image.
—
another image
Make sure this option is enabled if you want to replace an animated
image with another image.
In the input field provided here, enter the path and name of the image
you want to use.
The option is enabled by default. Likewise, a default image is config-
ured to replace animations.
•
Do not filter objects located within
Mark this checkbox if you want to exclude objects from filtering that are
within the same path or domain.
3–43