Secure Computing SSL Scanner - Manual (Page 177)

SSL Scanner
If the number of entries is higher than this number, the remaining entries are
shown on successive pages. A page indicator is then displayed, where you
can select a particular page by clicking on the appropriate arrow symbols.
You can also edit this list, by specifying the appropriate settings for a given en-
try. After doing this, click on
Apply Changes
to make these settings effective.
Use the following items to perform other activities relating to the list:
•
Filter
Type a filter expression in this input field and enter it using the
Enter
key
of your keyboard. The list will then display only entries matching the filter.
•
Delete Selected
Select the entry you wish to delete by marking the
Select
checkbox next
to it and click on this button. You can delete more than one entry in one go.
To delete all entries, mark the
Select all
checkbox and click on this button.
4.6
Trusted Certificate Authorities
The
Trusted Certificate Authorities
options are invoked by clicking on the
corresponding button under
SSL Scanner:
These are policy-dependent options, i. e. they are configured for a particular
policy. When you are configuring these options, you need to specify this policy.
To do this, select a policy from the drop-down list labeled
Policy
, which is lo-
cated above the
Certificate Verification
button:
The options are arranged under the following tab:
They are described in the upcoming section:
•
Trusted Certificate Authorities,
see 4.6.1
4–17