Secure Computing SSL Scanner - Manual (Page 99)

Common
After specifying the appropriate settings click on
Apply Changes
to make
them effective.
Use the following input fields to configure limits for archives:
•
Maximum size of unpacked archive
Enter the maximum size (in MB) here that should be allowed for an archive.
•
Maximum recursion level
Enter the maximum number of recursion levels here that should be allowed
for an archive.
3.6
Generic Header Filter
The
Generic Header Filter
options are invoked by clicking on the correspond-
ing button under
Common:
If you want to enable any of these options, mark the checkbox that is on this
button.
Then click on
Apply Changes
to make this setting effective.
These are policy-dependent options, i. e. they are configured for a particular
policy. When you are configuring these options, you need to specify this policy.
To do this, select a policy from the drop-down list labeled
Policy
, which is lo-
cated above the
Media Type Filters
button:
The options are arranged under the following tab:
They are described in the upcoming section:
•
Generic Header Filter,
see 3.6.1
3–29