2 | hardware preparation, Installing batteries and attaching the tether, Nstalling – Socket Mobile Bluetooth iPAQ User Manual
Page 10: Atteries and, Ttaching the, Ether, 2 | h, Ardware, Reparation
Advertising
10
2 | H
ARDWARE
P
REPARATION
I
NSTALLING
B
ATTERIES AND
A
TTACHING THE
T
ETHER
1. Use a coin or screwdriver to unlock and remove the battery cover. Turn
the lock underneath the scanner to a horizontal position to unlock.
2. Remove the battery cover.
For the Bluetooth CHS v2, the Bluetooth Device Address is printed
on a label inside the battery compartment. The address is used to
identify the Bluetooth CHS.
3. If desired, attach the tether. Wrap the string loop around the inside part
of the lock.
Advertising