Socket Mobile Bluetooth iPAQ - Manual (Page 89)

CHAPTER 8: SETUP FOR NOKIA E71 89
SocketScan Auto-Reconnect
The scanner will disconnect if it is powered off or moves out of the
connection range. If the scanner is powered back on or returns back in range
within 3 minutes after disconnection, SocketScan will automatically attempt
re-connection.
• Failure to reconnect will cause the scanner to end auto-reconnect mode
and disconnect. You will then be required to make a connection manually
through SocketScan.
• A manual connection will also be required if the scanner is not powered
back on or does not return back in connection range within 3 minutes
after a disconnection.
• A connection remains when the smartphone device is in suspend mode.
D ISCONNECTING
To disconnect, in the SocketScan menu, select Disconnect.
Turning off the Bluetooth CHS
To turn off the Bluetooth CHS, press and hold the power button for at least 3
seconds, until the Bluetooth CHS beeps twice (high-low) and the blue LED
turns off.
This beep pattern is for the Bluetooth CHS v2.