Socket Mobile Bluetooth iPAQ - Manual (Page 90)

90
S YMBOLOGY S ELECTOR
The feature makes it easy to modify which symbologies you want the
scanner to recognize. By default, the scanner is set to recognize several of
the most common symbologies.
You can configure symbologies only when the Bluetooth CHS is
connected to your smartphone.
1. In the main screen of SocketScan, select Options | Settings.
2. In the screen that appears, check the symbologies you wish to enable.
Uncheck those you wish to disable. Select OK.
Enabling all possible symbologies will make the decode process
slightly longer.
The RSS symbology is now known as GS1 DataBar.
If you want to read UPC-A symbols, disable the GS1 DataBar
option so that GS1 DataBar symbols don’t get mistakenly
decoded.
S
CANNER
S
ETTINGS
You can configure scanner settings only when the Bluetooth CHS is
connected to your smartphone.
1. In the main screen of SocketScan, select Options | Settings.
2. A screen will explain special prefix/suffix options you can configure. Read
the information and select OK.
3. In the next screen, enter any settings, as desired:
• Prefix: Type characters you would like appended before scanned data
(128 character maximum). Besides special data items, only printable ASCII
characters can be used.
• Suffix: Type characters you would like appended after scanned data (128
character maximum). Besides special data items, only printable ASCII
characters can be used. The default suffix is a carriage return [CR].