Socket Mobile Bluetooth iPAQ - Manual (Page 17)

CHAPTER 3: SETUP FOR WINDOWS XP, VISTA, AND 7 17
STEP 5: C ONFIGURE B LUETOOTH S ETTINGS
Follow the appropriate instructions for your Bluetooth stack. Configuration
is only needed the first time you connect the Bluetooth CHS to your PC.
Refer to your Bluetooth software manual for full instructions.
SocketScan supports a generic Bluetooth COM port and may be able to
connect to Bluetooth stacks other than those listed.
Microsoft Bluetooth Stack:
1. Right-click on the Bluetooth icon in the task tray. In the pop-up menu,
click Add a Bluetooth Device for Windows XP/Vista or Add a Device
for Windows 7.
2. The Add Bluetooth Device Wizard will start.
- Windows 7: Your computer will automatically begin searching for
Bluetooth devices in range and report found devices.
- Windows XP or Vista: A welcome screen will appear. Check the box My
device is set up and ready to be found. Click Next.
3. After the search, select Socket CHS [xxxxxx]. Click Next.
Note: The characters in brackets are the last 6 characters of the scanner’s
Bluetooth Device Address, which is labeled inside the battery compartment
for the Bluetooth CHS v2.
4. A passkey or pairing option screen will appear.
- Windows 7: Select Enter the device’s pairing code and enter the
default PIN 1234 . Click Next.
- Windows XP or Vista: Select Use the passkey found in the
documentation and enter the default PIN 1234 . Click Next.
5. Your computer will connect to the scanner. Status balloons will appear,
reporting the connection progress. After connecting, the Bluetooth CHS
will beep once, and the LED will blink blue once every 3 seconds.