Socket Mobile Bluetooth iPAQ - Manual (Page 56)

56
STEP 6: T URN ON THE B LUETOOTH
CHS
Press and hold the small power button for 3 seconds, until the LED
turns blue and the scanner beeps twice (low - high).
The LED should blink blue once every second to show that the Bluetooth
radio is on but not connected.
Note: The following Bluetooth mode sequence is for the Bluetooth CHS v2.
Time after turning on scanner Bluetooth mode
0-5 minutes
Discoverable and connectable
5-20 minutes Connectable
20 minutes Scanner automatically powers off
STEP 7: P REPARE THE C ONNECTION
SCENARIO 1:
1. Tap on the SocketScan icon at the bottom of the screen. In the menu,
tap Connect CS.
Note: The Connect CS option appears after cordless scanner support. is
enabled.
2. If the Bluetooth radio of your device is turned off, Connect!Agent will ask
if you want to turn it on. Tap Yes.