Socket Mobile Bluetooth iPAQ - Manual (Page 83)

CHAPTER 7: SETUP FOR RIM BLACKBERRY 83
D ISCONNECTING
To disconnect, in the SocketScan menu, click Disconnect CHS.
Turning off the Bluetooth CHS
To turn off the Bluetooth CHS, press and hold the power button for at least 3
seconds, until the Bluetooth CHS beeps twice (high-low) and the blue LED
turns off. (This beep pattern is for the Bluetooth CHS v2.)
S YMBOLOGY S ELECTOR
The feature makes it easy to modify which symbologies you want the
scanner to recognize. By default, the scanner is set to recognize several of
the most common symbologies.
You can configure symbologies only when the Bluetooth CHS is
connected to your smartphone.
1. In the SocketScan menu, click Symbology Selector.
2. In the screen that appears, press the space key to check the symbologies
you wish to enable. Uncheck those you wish to disable.
3. In the Options menu, click Save.
Enabling all possible symbologies will make the decode process
slightly longer.
The RSS symbology is now known as GS1 DataBar.
If you would like to read UPC-A symbols, be sure to disable GS1
DataBar so that GS1 DataBar symbols don’t get mistakenly
decoded.
S CANNER S ETTINGS
You can configure scanner settings only when the Bluetooth CHS is
connected to your smartphone.
1. In the SocketScan menu, click Settings.
2. In the Settings screen, enter any settings, as desired: