Socket Mobile Bluetooth iPAQ - Manual (Page 70)

70
6. Your web browser will present a series of dialogs.
Internet Explorer:
• In the File Download –Security Warning dialog, click Run.
• In the second warning dialog, click Run.
Firefox:
• In the file opening dialog, click Save File.
• Firefox will download the file.
• In the Downloads list, next to SocketScanCE.exe, click Open.
• In the warning dialog, click OK to continue.
7. The SocketScan Installation program will begin. Follow the instructions on
your screen to install the software.
8. When software installation is complete, disconnect the device from the
host PC. Soft reset the device by pressing the reset button.
STEP 3: T URN ON THE B LUETOOTH CHS
Press and hold the small power button for 3 seconds, until the LED
turns blue and the scanner beeps twice (low-high). The LED should blink
blue once every second to show that the Bluetooth radio is on but not
connected.
The following Bluetooth mode sequence is for the Bluetooth CHS v2.
Time after turning on scanner Bluetooth mode
0-5 minutes
Discoverable and connectable
5-20 minutes Connectable
20 minutes Scanner automatically powers off