Star Micronics PCI/ISA System Board D6-IN - Manual (Page 34)

D6-IN System Board Manual
Chapter 4: The BIOS Setup Utility
32
Setting the Advanced Screen
To move to the Advanced screen, use the left and right
arrow keys
<←/→>
keys until you see the screen below.
Figure 4-4: Advanced Screen
Serial Port A
Serial Port A may be set for Auto (default), COM1,
COM2, COM3, COM4 or Disabled.
Serial Port B
Serial Port B may be set for Auto (default), COM1,
COM2, COM3, COM4 or Disabled.
Serial Port B Mode
Serial Port B Mode may be set for COM Port (default),
IrDA or ASK-IR. This selection sets the interface to
standard or infrared.