Star Micronics PCI/ISA System Board D6-IN - Manual (Page 41)

D6-IN System Board Manual 39
Chapter 4: The BIOS Setup Utility
Maximum, Medium or Minimum power savings, you do
not need to make any more adjustments. If you select
Customized, you must set the following five categories.
Standby Timeout
The Standby Timeout category sets the amount of time
that elapses for the system to enter the power saving
mode. The options are Disabled (default), 2 min., 15
min., 30 min., 60 min., 2 hr., 3 hr. or 4 hr. Before making
changes, "Customized" must be selected in the Power
Management Mode category.
Suspend Timeout
The Suspend Timeout category sets the amount of time
that elapses for the system to enter the Suspend Mode.
The timer starts when the Standby Mode is activated.
The options are Disabled (default), 2 min., 15 min., 30
min., 60 min., 2 hr., 3 hr., and 4 hr. Before making
changes, "Customized" must be selected in the Power
Management Mode category.
Standby CPU Speed
This category sets the CPU speed during power saving
mode. The options are Maximum (default), Medium,
Minimum and Slowest. Before making changes, "Cus-
tomized" must be selected in the Power Management
Mode category.
Fixed Disk Timeout
This category sets the amount of time that elapses before
the IDE drive enters spin-down mode to conserve power.
The options are Disabled (default), 1 min., 2 min., 5 min.,
10 min., or 15 min. Before making changes, "Customized"
must be selected in the Power Management Mode cat-
egory.