Star Micronics PCI/ISA System Board D6-IN - Manual (Page 46)

D6-IN System Board Manual
Internal Cache: 16K Level 1 Write Back on CPU chip
256K or 512K Level 2 cache in CPU
I/O Ports: Two high speed serial ports (16550 compatible).
Enhanced Parallel Port with ECP and EPP support.
Infrared support for IrDA
Two USB ports (optional)
Floppy Port: Supports two floppy drives
(2.88MB, 1.44MB, 1.2MB, 720K, 360K).
PCI IDE Ports: Two 40-pin IDE connectors
Mode 4 Enhanced IDE Bus Mastering controller.
Multiple sector transfer support.
Auto detection of add-in IDE board.
Environmental Specifications
The environment in which the D6-IN is located is critical.
Micronics recommends the following environmental specifications:
Temperature Range
Operating: 50 to 104 degrees Fahrenheit (10 to 40 degrees Celsius).
Non -Operating: 50 to 140 degrees Fahrenheit (10 to 60 degrees
Celsius). Shipping: -22 to 140 degrees Fahrenheit (-30 to 60 degrees
Celsius).
Relative Humidity
Operating: 20% to 80%.
Non-Operating: 5% to 90%.
Appendix A: Technical Information
44