Star Micronics PCI/ISA System Board D6-IN - Manual (Page 44)

D6-IN System Board Manual
Chapter 4: The BIOS Setup Utility
42
Floppy Check
This selection checks for the existence of a floppy drive.
The default setting is Enabled.
Numlock
This selection activates Numlock upon boot. Setting this
to Auto (default) activates Numlock if the BIOS detects
a numeric keyboard. It may also be turned ON or OFF.
Exit Screen
After you complete configuring the BIOS, select the Exit
screen.
Figure 4-9: Exit Screen
Choose “Save Changes and Exit” and reboot the com-
puter. Your computer is ready for use.