Star Micronics PCI/ISA System Board D6-IN - Manual (Page 35)

D6-IN System Board Manual
Chapter 4: The BIOS Setup Utility
33
Parallel Port
The parallel port may be set for Auto (default), LPT1,
LPT2 or may be disabled.
Parallel Port Mode
The parallel port may be set for output mode (AT)
(default), bidirectional mode (PS/2) and Extended Capa-
bilities Port (ECP).
Diskette Controller
The floppy disk controller may be enabled or disabled.
Integrated PCI IDE
Enables the integrated Local Bus IDE adapter. The PCI
IDE controller may be set for Primary (up to two hard
disks), Both (up to four hard disks) or it may be disabled.
The default setting is Both.
IRQ12
This selection routes IRQ12 to the PS/2 Mouse (default)
or the ISA bus.
Plug & Play O/S
This selection, when set to Yes (default), allows the
system to work with a Plug and Play operating system such
as Windows 95.
Reset Configuration Data
Select Yes to clear the system configuration data. The
default setting is No.